See also:

Activating
Activating The High-beam Assistant can be activated when the low beams are switched on. 1. Turn the light switch to or . 2. Press the button on the turn signal lever, arrow. The indicator ...

Air volume, manual
You can vary the air volume by pressing on the corresponding side. You can reactivate the automatic mode for the air flow rate with the AUTO button. ...

Measurement
Measurements are made by ultrasound sensors in the bumpers. The range is approx. 6 ft/2 m. An acoustic warning is first given: ▷ By the front sensors and two rear corner sensors at approx ...