Removing: Electrical* head restraints
Note
Do not remove the rear head restraints. To avoid damage, they can only be installed by your service center.
Removing
Only remove the head restraint if no one will be sitting in the seat in question.
1. Completely raise the head restraint.
2. Completely pull out the head restraint with a firm tug.
Before transporting passengers
Reinstall the head restraint before transporting anyone in the seat; otherwise, the protective function of the head restraint is unavailable.
See also:
Reassigning individual programs
1. Switch on the ignition.
2. Hold the hand-held transmitter at a distance
of approx. 1 to 3 in/2.5 to 8 cm from the
memory buttons.
The required distance depends on the particular
hand-held t ...
DOT Quality Grades
Treadwear
Traction AA A B C
Temperature A B C
Conform to Federal Safety Requirements
All passenger car tires must conform to
Federal Safety Requirements in addition to
these grades.◀ ...
Switching on automatically
Select transmission position R with the engine
running.
The backup camera image is displayed if the
system was switched on via the iDrive. ...