See also:

Changing, maintaining, and storing the speed
The rocker switch can be pressed while the system is interrupted to maintain and store the current speed. DSC Dynamic Stability Control is switched on, if necessary. Adapting the desired speed ...

Controls
Buttons at a glance 1 System on/off, interrupt 2 Resume speed 3 Store speed* 4 Store, maintain/change speed Switching on Press the button on the steering wheel. The marking in the speedom ...

Towing methods when towing other vehicles
Tow bar The tow fittings used should be on the same side on both vehicles. Should it prove impossible to avoid mounting the tow bar at an offset angle, please observe the following: ▷ C ...