AUTO program
Press the button.
Air volume, air distribution, and temperature are controlled automatically:
Depending on the selected temperature, AUTO intensity, and outside influences, the air is directed to the upper body and into the footwell.
The cooling function is switched on automatically with the AUTO program.
Intensity of the AUTO program
With the AUTO program switched on, automatic control of the air volume and air distribution can be adjusted.
Press the left or right side of
the button:
decrease or increase the intensity.
The selected intensity is shown on the display of the automatic climate control.
See also:
Washer fluid reservoir
Adding washer fluid
Only add washer fluid when the engine is
cool, and then close the cover completely to
avoid contact between the washer fluid and hot
engine parts.
Otherwise, there is the ...
Tire inflation pressures up to 100 mph/160 km/h
For speeds of up to 100 mph/160 km/h and for
optimum driving comfort, note the pressure values
in the tire inflation pressure table, refer to
page 238, and adjust as necessary.
These pressure va ...
Date
The settings are stored for the remote control currently in use, refer also to
Personal Profile on page 28.
Setting the dateIn the instrument cluster
To set the dd/mm or mm/dd date format, refer t ...