Message when the system was not reset

A Check Control message is displayed.

The system detected a wheel change but was not reset.

Warnings regarding the current tire inflation pressure are not reliable.

Check the tire inflation pressure and reset the system.

    See also:

    Programming
    LED, arrow 1. Memory buttons, arrow 2. Fixed-code hand-held transmitters 1. Switch on the ignition. 2. Initial setup: Press both outer buttons 1 and 3 for approx. 20 seconds until the L ...

    Automatic deactivation during forward travel
    The system switches off when a certain driving distance or speed is exceeded. Switch the system back on if necessary. ...

    Received calls
    Displaying calls The 20 calls that were last received are displayed. 1. "Telephone" 2. "Received calls" Displaying calls Calling a number from the list Selecting an entry. ...