Tire Pressure Monitor TPM

The concept

The tire inflation pressure is measured in the four mounted tires. The system notifies you if there is a significant loss of pressure in one or more tires.

Functional requirements

The system must have been reset when the inflation pressure was correct; otherwise, reliable signaling of a flat tire is not ensured. Always use wheels with TPM electronics to ensure that the system will operate properly. Reset the system after each correction of the tire inflation pressure and after every tire or wheel change.

System limits

Sudden serious tire damage caused by Sudden tire damage
Sudden serious tire damage caused by external influences cannot be indicated in advance.◀

The system does not operate correctly if it has not been reset. For example, a flat tire may be indicated despite correct tire inflation pressures.

The system is inactive and cannot indicate a flat tire:

▷ For a mounted wheel without TPM electronics.
▷ When the TPM is disturbed by other systems or devices with the same radio frequency.

Status display

Status display The current status of the Tire Pressure Monitor TPM can be displayed on the Control Display, e.g., whether or not the TPM is active.

1. "Vehicle Info"
2. "Vehicle status"
3. The status is displayed. "Tire Pressure Monitor - TPM"

The status is displayed.

See also:

Sound output
Switching on/off When the ignition is switched off: press ON/OFF button on the radio. Muting When the ignition is switched on or the engine is running: press the ON/OFF button on the radio. ...

Opening
► Press the switch to the resistance point. The window opens while the switch is held. ► Press the switch beyond the resistance point. The window opens automatically. Pre ...

Continuing destination guidance
If the destination was not reached during the last trip, destination guidance can be resumed. "Resume guidance" ...