General information
Moving parts need to be broken in to adjust to each other.
The following instructions will help achieve a long vehicle life and good economy.
See also:
Changing, maintaining, and storing the
speed
The rocker switch can be pressed while the system
is interrupted to maintain and store the current
speed. DSC Dynamic Stability Control is
switched on, if necessary.
Adapting the desired speed ...
Screw thread
Push out the cover by pressing on the top edge.
Front
Rear
...
Capturing the image
Two cameras integrated in the bumpers capture
the image.
The cameras capture a maximum range of
330 ft/100 m.
Display
The images from both cameras are shown simultaneously
on the Control Disp ...
