Drive-off assistant

This system supports driving away on gradients.

The parking brake is not required.

1. Hold the vehicle in place with the foot brake.

2. Release the foot brake and drive away without delay.

Depending on the vehicle load, the vehicle may roll back slightly.

After releasing the foot brake, start driving Driving off without delay
After releasing the foot brake, start driving without delay, since the drive-off assistant will not hold the vehicle in place for more than approx.

2 seconds and the vehicle will begin rolling back.◀

    See also:

    Changing, maintaining, and storing the speed
    The rocker switch can be pressed while the system is interrupted to maintain and store the current speed. DSC Dynamic Stability Control is switched on, if necessary. Adapting the desired speed ...

    Customer Relations
    At a glance Contact Customer Relations for information on all aspects of your vehicle. Calling Customer Relations Vehicles not equipped with BMW Assist or BMW TeleService 1. "ConnectedDri ...

    Deactivating/activating DTC Dynamic Traction Control
    Activating the Dynamic Traction Control DTC provides maximum traction on loose ground. Driving stability is limited during acceleration and when driving in bends. Activating DTC Press the butt ...