Resuming cruising speed
Press button 4:
The stored speed is resumed and maintained
See also:
Socket for OBD Onboard Diagnosis
Position
There is an OBD socket on the driver's side for
checking the primary components in the vehicle
emissions.
Emissions
▷ The warning lamp lights up:
Emissions are deteriorating ...
Switching off automatically
The system switches off and the LED goes out:
After approx. 33 ft/10 m when driving forward.
Above approx. 9 mph/15 km/h when driving
forward.
Switch on the system again if necessary. ...
Programming
LED, arrow 1.
Memory buttons, arrow 2.
Fixed-code hand-held transmitters
1. Switch on the ignition.
2. Initial setup:
Press both outer buttons 1 and 3 for approx.
20 seconds until the L ...
