Drive-off assistant
The drive-off assistant enables you to drive off smoothly on uphill gradients. It is not necessary to use the parking brake for this.
1. Hold the car in place by depressing the brake.
2. Release the brake and drive off without delay.
The drive-off assistant holds the car in place
for approx. 2 seconds after the brake is released. Drive off without delay after
releasing the brake. Otherwise, the drive-off assistant will no longer hold the
car in place after approx. 2 seconds and the car will start to roll backwards.
See also:
Preparation
1. Check whether the battery of the other vehicle
has a voltage of 12 volts. This information
can be found on the battery.
2. Switch off the engine of the assisting vehicle.
3. Switch off any el ...
Resetting the system
Reset the system after each correction of the
tire inflation pressure and after every tire or
wheel change.
1. "Vehicle Info"
2. "Vehicle status"
3. "Reset"
4. S ...
Actions in the event of a flat tire
Normal tires
1. Identify the damaged tire.
Do this by checking the air pressure in all
four tires.
If the tire inflation pressure in all four tires is
correct, the Tire Pressure Monitor may not ...
