Headphones, vehicle loudspeakers
Connecting the headphones
Normal headphones
Connect via the jack 1/8"/3.5 mm, on the rear CD/DVD player.
Infrared headphones
Connection via the infrared interface on the lower edge of the screen.
Fitting infrared headphones and information on which headphones are supported can be obtained from your service center.
When using infrared headphones, ensure that the connection between the headphones and the infrared interface is not disrupted:
- Do not place an obstacle between the interface and headphones.
- Do not cover the interface.
- Do not scratch the interface.
Fold up display screens for interference-free reception.
Unfavorable light conditions such as bright ambient light can impair reception.
Sound output on the headphones or vehicle loudspeakers
Operation is only possible in the rear.
1. Open "Options".
2. "Headphones" or "Loudspeakers"
With the following setting, sound output in the rear is not possible via the vehicle speakers: "Driver control".
See also:
Turn signals, front
24-watt bulb, PY24W
1. Rotate bulb holder to the left and remove it
along with the bulb.
2. Rotate the bulb to the right along with the
socket and replace.
3. Install in the reverse order. ...
On the front passenger seat
After installing a child restraint fixing system on
the front passenger seat, ensure that the front
and side airbags on the front passenger side are
deactivated.
Deactivating the front passen ...
Controls
1 Change entertainment sources
2 Volume, on/off
3 Programmable memory buttons or radio station buttons
4 Change station/track
5 Eject CD/DVD
6 CD/DVD drive
7 Change wave band ...