DSC OFF
Driving stability is limited during acceleration and when driving in bends.
Stabilizing interventions by the Integral Active Steering* system are only performed by the rear axle steering.
To increase vehicle stability, activate DSC again as soon as possible.
Activating DSC OFF
Press and hold the button, but
not longer
than approx. 10 seconds, until the
indicator lamp for the DSC lights up in the instrument
cluster and DSC OFF is displayed in
the tachometer.
The DSC system is switched off.
Deactivating DSC OFF
Press the button.
DSC OFF and the DSC indicator lamp
go out.
Indicator/warning lamps
When DSC OFF is activated, DSC OFF is displayed in the tachometer.
The indicator lamp lights up: DSC
OFF
is activated.
See also:
Switching the reception on/off
1. "Navigation"
2. "Options" Open.
3. "Receive Traffic Info" ...
Adding engine oil
Filler neck
Only replenish the maximum oil amount of
1 US quart/liter if the message is displayed in the
instrument cluster or the oil level has dropped to
just at the lower mark of the dipst ...
Adjusting the info display
You can select what information from the computer
is to be displayed on the info display of the
instrument cluster.
1. "Settings"
2. "Info display"
3. Select the desired dis ...
