Deactivating DSC: DSC OFF

When DSC is deactivated, driving stability is reduced during acceleration and when driving in bends.

To increase vehicle stability, activate DSC again as soon as possible.

Deactivating DSC

Deactivating DSC
Deactivating DSC

Press and hold the button, but not longer than approx. 10 seconds, until the indicator lamp for DSC lights up in the instrument cluster and DSC OFF is displayed. DTC Dynamic Traction Control and DSC are deactivated together.

A message appears on the Control Display.

Please note any supplementary information that appears there.

Activating DSC

Press the button.

DSC OFF and the indicator lamp in the instrument cluster go out.

    See also:

    Displays in instrument cluster
    Displays in instrument cluster 1 Stored desired speed ▷ Green: the system is active. ▷ Orange: the system is interrupted. 2 Lights up yellow: vehicle detected ahead Display also ...

    Setting
    Pull the switch. The LED lights up. The indicator lamp lights up in red. The parking brake is set. Lower lamp: indicator lamp in Canadian models Set the parking brake and further secur ...

    Vehicle equipment
    All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, ...