Status display
The current status of the Tire Pressure Monitor TPM can be displayed on the Control Display, e.g., whether or not the TPM is active.
1. "Vehicle Info"
2. "Vehicle status"
3. 
"Tire Pressure Monitor - TPM"
The status is displayed.
See also:
Preparation
1. Check whether the battery of the other vehicle
has a voltage of 12 volts and approximately
the same capacitance in Ah. This information
can be found on the battery.
2. Switch off the engine ...
Gas station recommendation
The remaining range is calculated, and if necessary
gas stations along the route are displayed.
Even with the most current navigation data, information
regarding individual gas stations may
hav ...
Entering dates
Enter the dates for the required inspections.
Make sure the date on the Control Display is set
correctly
1. "Vehicle Info"
2. "Vehicle status"
3. "Service
required&qu ...