Display on the Control Display

Switching on the backup camera via iDrive

With Top View switched on:

The backup camera image is displayed. The setting "Rear view camera"

The backup camera image is displayed. The setting is stored for the remote control currently in use.

Brightness

With Top View switched on:

1. 2. Turn the controller until the desired setting "Brightness"

2. Turn the controller until the desired setting is reached and press the controller.

Contrast

With Top View switched on:

1. 2. Turn the controller until the desired setting "Contrast"

2. Turn the controller until the desired setting is reached and press the controller.

Displaying the turning circle and pathway lines

  • The static, red turning circle line shows the space needed to the side of the vehicle when the steering wheel is turned all the way.
  • The variable, green pathway line assists you in assessing the amount of space actually needed to the side of the vehicle.

The pathway line is dependent on the current steering angle and is continuously adjusted with the steering wheel movement.

Turning circle and pathway lines are displayed. "Parking aid lines"

Turning circle and pathway lines are displayed.

    See also:

    Swapping the telephone and additional telephone
    The function of the telephone and additional telephone can be swapped automatically. 1. "Telephone" 2. "Bluetooth® (phone)" 3. "Swap phone/addit. phone" ...

    The concept
    ► Most functions that are displayed on the Control Display can be operated by spoken commands via the voice activation system. The system prompts you to make your entries. ► Function ...

    Programming
    General information 1. Switch on the ignition. 2. Initial setup: Press and hold the left and right button on the interior rearview mirror simultaneously for approximately 20 seconds until the L ...