Message when the system was not reset
A Check Control message is displayed.
The system detected a wheel change but was not reset.
Warnings regarding the current tire inflation pressure are not reliable.
Check the tire inflation pressure and reset the system.
See also:
Switching off automatically
The system switches off and the LED goes out:
▷ After approx. 160 ft/50 m when driving forward.
▷ Above approx. 22 mph/36 km/h when driving
forward.
Switch on the system again if nece ...
Notes
If the battery is discharged, an engine can be
started using the battery of another vehicle and
two jumper cables. Only use jumper cables with
fully insulated clamp handles.
To prevent personal ...
Navigation
General information
Map
Split screen settings
Destination guidance with intermediate destinations
...
