Low tire pressure message
The yellow warning lamp lights up. A Check Control message is displayed.
- There is a flat tire or a major loss in tire inflation pressure.
- The system was not reset after a wheel change and thus warns based on the inflation pressures initialized last.
1. Reduce your speed and stop cautiously. Avoid sudden braking and steering maneuvers.
2. Check whether the vehicle is fitted with regular tires* or run-flat tires*.
Run-flat tires, are labeled with a circular symbol containing the letters RSC marked on the tire sidewall.
When a low inflation pressure is indicated, DSC Dynamic Stability Control is switched on if necessary.
See also:
After a power failure
Only put the parking brake into operation
after a power failure
The parking brake should only be put into operation
again if it was manually released due to an
interruption in the supply of el ...
Reporting safety defects
For US customers
The following only applies to vehicles owned
and operated in the US.
If you believe that your vehicle has a defect
which could cause a crash or could cause injury
or death, you ...
The concept
Pressing the Start/Stop button
switches the ignition on or off and
starts the engine.
Automatic transmission: the engine
starts if the brake is depressed
when the Start/Stop button is presse ...