All other models: Oil levelcheck

BMW X3 / BMW X3 iDrive Owners Manual / Mobility / Engine oil / All other models: Oil levelcheck

The concept

The oil level is monitored electronically during driving and shown on the Control Display.

If the oil level reaches the minimum level, a check control message is displayed.

Requirements

► The engine must be running and warm after the vehicle has been driven for at least 6 miles/10 km.
► The vehicle is stopped or being driven on a level roadway.

Displaying the oil level

1. "Vehicle Info"
2. "Vehicle status"
3. Possible messages "Engine oil level"

Possible messages

► "Engine oil level OK"
► "Measurement not possible at this time."
► "Measuring engine oil level..."

Duration with the engine running: approx.

3 minutes.

Duration while driving: approx. 5 minutes.

► "Engine oil level below minimum. Add 1 quart "
Add oil within the next 125 miles/200 km.

► "Engine oil level too high Have this checked."

Have the vehicle checked immediately.

Have the vehicle checked immediately; Too much engine oil
Have the vehicle checked immediately; otherwise, surplus oil can lead to engine damage.◄

► "Measurement inactive. Have this checked." Note the newly calculated remaining mileage until the next oil service. Have the system checked as soon as possible.

    See also:

    General information
    Enclosed areas Do not let the engine run in enclosed areas; otherwise, breathing of exhaust fumes may lead to loss of consciousness and death. The exhaust gases contain carbon monoxide, an od ...

    Jump starting
    Notes If the battery is discharged, an engine can be started using the battery of another vehicle and two jumper cables. Only use jumper cables with fully insulated clamp handles. To prevent p ...

    Supplementary text messages
    Addition information, such as on the cause of a fault or the required action, can be called up via Check Control. The supplementary text of urgent messages is displayed on the Control Display a ...