Adjusting the volume

Turn the knob until the desired volume is selected.

The setting is stored for the remote control currently in use.

The vehicle automatically adjusts the volume of the microphone on the telephone and the volume of the called party. Depending on the mobile phone, the volumes may need to be adjusted.

The settings can only be created during a call and must be adjusted separately for each telephone. The settings are deleted when the telephone is unpaired.

1. "Settings"
2. "Tone"
3. "Volume settings"
4. Select the desired setting: "Microphone" or "Loudspeak."
5. To adjust: turn the controller.
6. To store: press the controller.

    See also:

    Configuring the prewarning
    After the warning function is switched on, the following can be set via the iDrive: ▷ The prewarning can be switched on/off. ▷ The time of the prewarning can be set. These settings ha ...

    Display
    Night Vision with pedestrian detection is not available on the rear screen*. Settings via iDrive With Night Vision switched on: 1. Activate Night Vision with pedestrian detection. 2. Press the c ...

    Caring for special components
    Light-alloy wheels Use wheel cleaner, particularly during the winter months. Do not use aggressive, acidic, strongly alkaline or abrasive cleaners, or steam jets above 140 ℉/60 ℃; f ...