Replacing components

Vehicle equipment

All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, e. g., because of the selected optional equipment or country variant. This also applies for safety-related functions and systems.

Onboard vehicle tool kit

The onboard vehicle tool kit is located in a folddown

The onboard vehicle tool kit is located in a folddown cover in the trunk lid.

Unscrew the wing nut to open.

Wiper blade replacement

General information

blades Do not fold down the wipers without wiper blades
Do not fold down the wipers if wiper blades have not been installed; this may damage the windshield.◀

Replacing the wiper blades

1. To change the wiper blades, fold up, the wiper arms.
2. Fold up the wipers.

3. Position the wiper blade in a horizontal position.

3. Position the wiper blade in a horizontal position.
4. Remove the wiper blade toward one side.

Lamp and bulb replacement

See also:

Ignition off
Press the Start/Stop button again, and do not press on the brake pedal at the same time. All indicator lamps in the instrument cluster go out. To save battery power when the engine is off, swi ...

Resetting the system
Reset the system after each correction of the tire inflation pressure and after every tire or wheel change. 1. "Vehicle Info" 2. "Vehicle status" 3. "Reset" 4. S ...

Initialization
The initialization process adopts the set inflation tire pressures as reference values for the detection of a flat tire. Initialization is started by confirming the inflation pressures. Do not ...