Data memory

Your vehicle records data relating to vehicle operation, faults and user settings. These data are stored in the remote control and can be read out with suitable devices, particularly when the vehicle is serviced. The data obtained in this way provide valuable information for service processes and repair or for optimizing and developing vehicle functions further.

In addition, if you signed a service contract for Assist, certain vehicle data can be sent directly from the vehicle to facilitate the desired services.

    See also:

    Display on the Control Display
    Switching on the backup camera via the iDrive With PDC activated: "Rear view camera" The backup camera image is displayed. The setting is stored for the remote control currently in ...

    Low tire pressure message
    The yellow warning lamp lights up. A Check Control message is displayed. ▷ There is a flat tire or a major loss in tire inflation pressure. ▷ The system was not reset after a whee ...

    Increasing or reducing speed
    The speed can be changed in the range from approx. 4 mph/6 km/h to approx. 15 mph/25 km/ h by pressing the accelerator or brake pedal lightly. A target speed within the same range can be spec ...