Tire inflation pressure

Safety information

The tire characteristics and tire inflation pressure influence the following:

▷ The service life of the tires.
▷ Road safety.
▷ Driving comfort.

Checking the pressure

Only check the tire inflation pressure when the tires are cold. This means after driving no more than 1.25 miles/2 km or when the vehicle has been parked for at least 2 hours. When the tires are warm, the tire inflation pressure is higher.

Regularly check the tire inflation pressure Check the tire inflation pressure regularly
Regularly check the tire inflation pressure and correct it as needed: at least twice a month and before a long trip. If you fail to observe this precaution, you may be driving on tires with incorrect tire pressures, a condition that may not only compromise your vehicle's driving stability, but also lead to tire damage and the risk of an accident.◀

After correcting the tire inflation pressure:

▷ Reinitialize the Flat Tire Monitor.
▷ Reinitialize the Tire Pressure Monitor.

Pressure specifications

The tire inflation pressure table, contains all pressure specifications for the specified tire sizes at the ambient temperature.

Pressure specifications apply to approved tire sizes and recommended tire brands.

This information can be obtained from your service center.

To identify the correct tire inflation pressure, please note the following:

▷ Tire sizes of your vehicle.
▷ Maximum allowable driving speed.

Tire inflation pressures up to 100 mph/ 160 km/h

For speeds of up to 100 mph/160 km/h and for optimum driving comfort, note the pressure values in the tire inflation pressure table, and adjust as necessary

These pressure values can also be found on the

These pressure values can also be found on the tire inflation pressure label on the driver's door pillar.

Do not exceed 100 mph/160 km/h; otherwise, Maximum permissible speed
Do not exceed 100 mph/160 km/h; otherwise, tire damage and accidents may result.◀

See also:

Following part replacement
The same breaking in procedures should be observed if any of the components mentioned above have to be renewed in the course of the vehicle's operating life. ...

Profile management
Opening the profiles A different profile can be called up than the one associated with the remote control currently in use. 1. "Settings" 2. "Profiles" 3. Select a profil ...

Specifying the street
If the system does not recognize the street, one of the following pieces of information is displayed: ▷ A street name in the vicinity. ▷ The county. ▷ The coordinates of the des ...