Headphones, vehicle loudspeakers
Connecting the headphones
Normal headphones
Connect via the jack 1/8"/3.5 mm, on the rear CD/DVD player.
Infrared headphones
Connection via the infrared interface on the lower edge of the screen.
Fitting infrared headphones and information on which headphones are supported can be obtained from your service center.
When using infrared headphones, ensure that the connection between the headphones and the infrared interface is not disrupted:
▷ Do not place an obstacle between the interface
and headphones.
▷ Do not cover the interface.
▷ Do not scratch the interface.
Fold up display screens for interference-free reception.
Unfavorable light conditions such as bright ambient light can impair reception.
Sound output on the headphones or vehicle loudspeakers
Operation is only possible in the rear.
1. "Options" Open.
2. "Headphones" or"Loudspeakers"
With the following setting, sound output in the
rear is not possible via the vehicle speakers:
"Driver control".
See also:
Brake system
Brakes require an initial break-in period of approx.
300 miles/500 km to achieve optimized
contact and wear patterns between brake pads
and rotors. Drive cautiously during this break-in
period. ...
Turn signal
Do not fold in the exterior mirrors
During driving and during the operation of
the turn signals/warning flashers, do not fold in
the exterior mirror, or else the additional flasher
lights ...
Manual transmission
Switching off the engine
1. With the vehicle at a standstill, press the
Start/Stop button.
2. Shift into first gear or reverse.
3. Set the parking brake. ...