Display on the Control Display

Switching on the backup camera via iDrive

With Top View switched on:

The backup camera image is displayed. The setting "Rear view camera" The backup camera image is displayed. The setting is stored for the remote control currently in use.

Brightness

With Top View switched on:

1. 2. Turn the controller until the desired setting"Brightness"
2. Turn the controller until the desired setting is reached and press the controller.

Contrast

With Top View switched on:

1. 2. Turn the controller until the desired setting "Contrast"
2. Turn the controller until the desired setting is reached and press the controller.

Displaying the turning circle and pathway lines

▷ The static, red turning circle line shows the space needed to the side of the vehicle when the steering wheel is turned all the way.
▷ The variable, green pathway line assists you in assessing the amount of space actually needed to the side of the vehicle.

The pathway line is dependent on the current steering angle and is continuously adjusted with the steering wheel movement.

Turning circle and pathway lines are displayed. "Parking aid lines" Turning circle and pathway lines are displayed.

    See also:

    Adding engine oil
    Filler neck BMW X5 BMW X6 Add a maximum quantity of 1 US quart/1 liter of oil only after the corresponding message appears on the Control Display. Add oil promptly Add oil within the ne ...

    System limits
    Check the traffic situation as well Check the traffic situation around the vehicle with your own eyes. Otherwise, an accident could result from road users or objects located outside the pictu ...

    Switching off the engine
    Procedure 1. Engage transmission position P with the vehicle stopped. 2. Press the Start/Stop button. 3. Set the parking brake. 4. Remove the remote control from the ignition lock Before driv ...