Indicator/warning lamps

controls The indicator lamp flashes: DSC controls the drive forces and brake forces.

The indicator lamp lights up: DSC has failed.

    See also:

    Deactivating the system
    ▷ When driving, press the lever up or down twice. ▷ When stationary, do the same while depressing the brake pedal. ▷ Switch off the ignition. The displays go out, and the stor ...

    Functional requirement
    ▷ To lock the vehicle, the remote control must be located outside of the vehicle.. ▷ The next unlocking and locking cycle is not possible until after approx. 2 seconds.. ▷ The e ...

    Tire tread
    Summer tires Do not drive with a tire tread depth of less than 0.12 in/3 mm. There is an increased danger of hydroplaning if the tread depth is less than 0.12 in/3 mm. Winter tires Do not driv ...