Trip computer

There are two types of computer.

▷ "Onboard info": the values can be reset as often as necessary.
▷ "Trip computer": the values provide an overview of the current trip.

Resetting the trip computer

1. "Vehicle Info"
2. "Trip computer"
3. "Reset": all values are reset.

"Automatically reset": all values are reset approx. 4 hours after the vehicle comes to a standstill.

Display on the Control Display

    See also:

    Radar sensors
    The radar sensors are located under the rear bumper. The system may not be fully functional in the following situations: ▷ Dirty or icy bumper. ▷ Stickers on the bumper. A Check ...

    Automatic mode
    The automatic engine start/stop function is operational after each engine start. The function is activated above a certain speed. ▷ Manual transmission: above 3 mph, approx. 5 km/h. ▷ ...

    Information in detail
    Range Displays the estimated cruising range available with the remaining fuel. It is calculated based on your driving style over the last 20 miles/30 km. If there is only enough fuel left for l ...