Front seat heating

Switching on

Switching on

temperature Press the button once for each temperature level.

The maximum temperature is reached when three LEDs are lit.

If the drive is continued within approx. 15 minutes, the seat heating is activated automatically with the temperature selected last.

Switching off

Press the button longer.

The LEDs go out.

The temperature may be reduced or seat heating may be switched off entirely to save battery power.

Temperature distribution

The heating action in the seat cushion and backrest can be distributed in different ways.

1. "Climate"
2. "Seat heating distribution"
3. Select the required seat.

4. Turn the controller to set the temperature

4. Turn the controller to set the temperature distribution.

    See also:

    TRACTION
    When TRACTION is active, the vehicle has maximum traction on loose road surfaces. DTC Dynamic Traction Control, refer to page 105, is activated. Driving stability is limited during acceleration ...

    Lumbar support
    The curvature of the seat backrest can be adjusted in such a way that it supports the lumbar region of the spine. The lower back and the spine are supported for upright posture. ▷ Press ...

    Under the Hood
    The 760's 6.0-liter V-12 generates 438 horsepower and 444 pounds-feet of torque. The gear selector for the six-speed Steptronic automatic transmission is located just ahead of the steering-wheel r ...