Notes
Steam jets or high-pressure
washers
When using steam jets or high-pressure washers, hold them a sufficient distance away and use a maximum temperature of 140 ℉/ 60 ℃.
Holding them too close or using excessively high pressures or temperatures can cause damage or preliminary damage that may then lead to long-term damage.
Follow the operating instructions for the highpressure washer.
Cleaning sensors/cameras with
highpressure
washers
When using high-pressure washers, do not spray the exterior sensors and cameras, e.g., Park Distance Control, for extended periods of time and only from a distance of at least 12 in/ 30 cm.
Wash your vehicle frequently, particularly in winter.
Intense soiling and road salt can damage the vehicle.
See also:
Low tire pressure message
The yellow warning lamp
lights up. A
Check Control message is displayed.
► There is a flat tire or a major loss in
tire inflation pressure.
► The system was not reset after ...
Information at a glance
Repeatedly pressing the button on the turn signal
lever calls up the following information on the
info display:
▷ Range.
▷ Average fuel consumption.
▷ Average speed.
▷ ...
General information
Enclosed areas
Do not let the engine run in enclosed
areas; otherwise, breathing of exhaust fumes
may lead to loss of consciousness and death.
The exhaust gases contain carbon monoxide, an
o ...
