See also:

Functional requirements
The system must have been initialized when the tire inflation pressure was correct; otherwise, reliable signaling of a flat tire is not ensured. Initialize the system after each correction of th ...

Buttons at a glance
Buttons at a glance 1 System on/off, interrupt 2 Resume speed 3 Store speed 4 Reduce distance 5 Store, maintain/change speed 6 Increase distance ...

Reassigning individual programs
1. Switch on the ignition. 2. Hold the hand-held transmitter at a distance of approx. 1 to 3 in/2.5 to 8 cm from the memory buttons. The required distance depends on the particular hand-held t ...