Calling up settings

while driving Do not retrieve the memory while driving

Do not retrieve the memory setting while driving, as an unexpected movement of the seat or steering wheel could result in an accident.

Comfort function

1. Open the driver's door.

2. Switch off the ignition.

3. Briefly press the desired button 1 or 2.

The corresponding seat position is performed automatically.

The procedure stops when a switch for adjusting the seat or one of the buttons is pressed.

Safety mode

1. Close the driver's door or switch on the ignition.

2. Press and hold the desired button 1 or 2 until the adjustment procedure is completed.

Calling up of a seat position deactivated

After a brief period, the calling up of stored seat positions is deactivated to save battery power.

To reactivate calling up of a seat position:

▷ Open and close the door or trunk lid.

▷ Press a button on the remote control.

▷ Press the Start/Stop button.

    See also:

    Two additional gears mean threefold progress: quicker shifts, greater smoothness, enhanced efficiency.
    The wider spread of ratios allows the engine to run at lower speeds, often in the "tallest" gear, 8th. Yet even with this wider spread, the steps between adjacent gears are reduced; in t ...

    Pinch protection system
    If the closing force when closing the glass sunroof exceeds a certain value, the closing movement is stopped, beginning at approximately the middle of the opening in the roof, or from the tilt ...

    Entering letters and numbers
    1. Turn the controller: select letters or numbers. 2. Select additional letters or numbers if needed. 3. "OK": confirm the entry. Switching between letters and numbers Depending on ...