Residual heat

The heat stored in the engine is used to heat the interior.

Functional requirement

▷ Up to 15 minutes after the engine has been switched off.
▷ Warm engine.
▷ The battery is sufficiently charged.
▷ External temperature below 77 ℉/25 ℃.

Switching on

1. Switch off the ignition.

2. Press the right-hand button.

the automatic REST appears on the display of the automatic climate control when the residual heat utilization is switched on.

From radio readiness the interior temperature, the air volume and the air distribution can be set.

Switching off

You can select the lowest blower speed by pressing and holding the left side. Pressing again switches off the residual heat utilization.

REST disappears from the display of the automatic climate control.

    See also:

    Switching on
    The cooler can be operated at two levels. 1. Switch on the ignition. 2. Press the button once for each cooling level. The highest cooling power is active when two LEDs are lit. If the coole ...

    Activating
    1. Turn the light switch to or . 2. Press the button on the turn signal lever, arrow. The indicator lamp in the instrument cluster lights up. When the lights are switched on, the high b ...

    Mounting LATCH child restraint fixing systems
    1. Mount the child restraint fixing system; refer to the operating instructions of the system. 2. Ensure that both LATCH anchors are properly connected. ...