Reassigning individual programs

1. Switch on the ignition.

2. Hold the hand-held transmitter a distance of approx. 2 to 8 in/5 to 20 cm from the memory buttons.

3. Press the memory button of the universal remote control.

4. If the LED flashes slowly after approx. 20 seconds, press the transmit button on the hand-held transmitter.

5. Release both buttons when the LED flashes rapidly.
If the LED does not flash rapidly after approx. 15 seconds, change the distance and repeat the step.

    See also:

    Avoiding unintentional alarms
    The tilt alarm sensor and interior motion sensor can be switched off together, such as in the following situations: ► In automatic car washes. ► In duplex garages. ► During tran ...

    Vehicle equipment
    All standard, country-specific and optional equipment that is offered in the model series is described in this chapter. Therefore, equipment is also described that is not available in a vehicle, ...

    Starting the Concierge service
    1. "BMW Assist" or "ConnectedDrive" 2. "Concierge" Starting the Concierge service 3. "Start service" A voice connection is established with the BMW Assi ...