Functional requirements

The system must have been reset when the inflation pressure was correct; otherwise, reliable signaling of a flat tire is not ensured. Always use wheels with TPM electronics to ensure that the system will operate properly. Reset the system after each correction of the tire inflation pressure and after every tire or wheel change.

System limits

Sudden serious tire damage caused by Sudden tire damage

Sudden serious tire damage caused by external influences cannot be indicated in advance.

The system does not operate correctly if it has not been reset. For example, a flat tire may be indicated despite correct tire inflation pressures.

The system is inactive and cannot indicate a flat tire:

▷ For a mounted wheel without TPM electronics. ▷ When the TPM is disturbed by other systems or devices with the same radio frequency.

    See also:

    2011 BMW 1 Series M Review by Joe Wiesenfelder
    Based on the BMW 1 Series, the 1 Series M takes its place among M performance versions of the 3, 5 and 6 Series cars and the X5 and X6 SUVs. Though the name "M1" seems a natural, BMW use ...

    Uniform Tire Quality Grading
    Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A ...

    At a glance
    In entering your destination you can select from the following options: ▷ Enter the destination manually, see below. ▷ Select the destination from the address book. ▷ Last des ...