Automatic Hold
The concept
This system assists the driver by automatically setting and releasing the brake, such as when moving in stop-and-go traffic.
The vehicle is automatically held in place when it is stationary.
On inclines, the system prevents the vehicle from rolling backward when driving away.

For your safety
Under the following conditions, Automatic Hold is automatically deactivated and the parking brake is set:
- The engine is switched off.
- A door is opened and driver's safety belt is unbuckled.
- The moving vehicle is brought to a standstill using the parking brake.

The
indicator lamp switches from green
to red and the letters AUTO H go out.
Lower lamp: indicator lamp in Canadian
models
Before driving away:
- Release the parking brake manually.
- Reactivate Automatic Hold.
Leaving the vehicle with the engine running
Before leaving the vehicle with the engine running, engage position P of the automatic transmission and ensure that the parking brake is set. Otherwise, the vehicle may begin to roll.
Activating
This function can be activated when the driver's door is closed and the safety belt is fastened, or while driving.
Press the button.
The LED and the letters AUTO H light up.
The indicator lamp lights up.
Automatic Hold is activated.
Deactivating
Press the button again.
The LED and the letters AUTO H go out.
Automatic Hold is deactivated.
If the vehicle is being held by Automatic Hold, press on the brake pedal to deactivate it.
When the parking brake, is set manually, Automatic Hold is deactivated automatically.
Driving
Automatic Hold is activated: the vehicle is automatically secured against rolling when it stops.

The indicator lamp lights up in green.
Step on the accelerator pedal to drive off.
The brake is released automatically.
The indicator lamp goes out.
Lower lamp: indicator lamp in Canadian models
Before driving into a car wash
Deactivate Automatic Hold; otherwise, the parking brake will be set when the vehicle is stationary and the vehicle will no longer be able to roll.
Parking
The parking brake is automatically set if the engine is switched off while the vehicle is being held by Automatic Hold.
The indicator lamp changes from
green
to red.
The parking brake is not set if
the engine
is switched off while the vehicle is coasting
to a halt. Automatic Hold is deactivated.
Lower lamp: indicator lamp in Canadian models
Take the remote control with you
Take the remote control with you when leaving the vehicle so that children, for example, cannot release the parking brake.
See also:
Displays
Program selection
Pressing the button displays a list
of the selectable programs.
Selected program
The selected program is displayed
in the instrument cluster.
Display on the Control D ...
Audio playback
Selecting the track using the button
Press the button repeatedly
until the
desired track is played.
Selecting a track via iDrive
Audio CDs
Select the desired track to begin playback
CDs/DV ...
Service Request
At a glanceInform your BMW center that you need to schedule a service appointment. The Teleservice
data is transmitted during a Service Request. If possible, your BMW center will
establish contact ...
