The concept
The parking brake is used to prevent the vehicle from rolling when it is parked.
- Engine switched off: the parking brake acts on the rear wheels.
- Engine running: the parking brake acts on the disc brakes of the front and rear wheels via the hydraulic brake system.
The parking brake can be set manually or automatically:
- Manual: by pulling and pushing the switch.
- Automatic: by activating Automatic Hold.
See also:
Controls
This chapter is intended to provide you with
information that will give you complete control of
your vehicle. All features and accessories that are
useful for driving and your safety, comfort an ...
Switching off automatically
The system switches off and the LED goes out:
After approx. 160 ft/50 m when driving forward.
Above approx. 22 mph/36 km/h when driving
forward.
Switch on the system again if necessary. ...
Units of measure
To set the respective units of measure, miles or
km for the odometer and ℃ or ℉ for the external
temperature.
The setting is stored for the remote control currently
in use. ...