Mounting LATCH child restraint fixing systems on power rear seats

1. Before mounting, adjust the seats to their basic position.

2. For better accessibility, tilt the backrest back slightly.

3. Mount the child restraint fixing system; refer to the operating instructions of the system.

4. Ensure that both LATCH anchors are properly connected.

5. After mounting, move the backrest back up slightly so that the child restraint fixing system rests lightly against the backrest.

    See also:

    Contacts
    Note If equipped with full mobile phone preparation package. At a glance Contacts can be created and edited. The contacts from the mobile phone are displayed as well if this function is supporte ...

    The concept
    The iDrive combines the functions of a multitude of switches. Thus, these functions can be operated from a central location. Using the iDrive during a trip To avoid becoming distracted and po ...

    Checking the pressure
    Only check the tire inflation pressure when the tires are cold. This means after driving no more than 1.25 miles/2 km or when the vehicle has been parked for at least 2 hours. When the tires a ...