Pinch protection system
If the closing force when closing the glass sunroof exceeds a certain value, the closing movement is stopped, beginning at approximately the middle of the opening in the roof, or from the tilted position during closing.
The glass sunroof opens again slightly.
Danger of pinching even with pinch protection
Despite the pinch protection system, check that the roof's closing path is clear; otherwise, the closing action may not be interrupted in certain extreme situations, such as when thin objects are present.
Closing without the pinch protection system
For example, if there is an external danger, proceed as follows:
1. Press the switch forward beyond the resistance
point and hold.
Pinch protection is limited and the roof reopens
slightly if the closing force exceeds a
certain value.
2. Press the switch forward again beyond the resistance point and hold until the roof closes without pinch protection.
See also:
Functional requirements
The system must have been initialized when the
tire inflation pressure was correct; otherwise,
reliable signaling of a flat tire is not ensured. Initialize
the system after each correction of th ...
Changing the map section
"Interactive map"
To shift the map: move the controller in the
required direction.
To shift the map diagonally: move the controller
in the required direction and turn it.
...
At a glance
At a glance
1 Function bar
2 Route section with traffic obstruction
3 Traffic sign for traffic obstruction
4 Planned route
5 Current location
6 Upper status field
7 Lower status field
Lines ...