Breaking-in period
General information
Moving parts need to be broken in to adjust to each other.
The following instructions will help achieve a long vehicle life and good economy.
Engine and differential
Always obey the official speed limit.
Up to 1,200 miles/2,000 km
Do not exceed the maximum engine and road speed:
► For gasoline engine, 4,500 rpm and 100 mph/160 km/h.
Avoid full-throttle operation and use of the transmission's kickdown mode for the initial miles.
From 1,200 miles/2,000 km
The engine and vehicle speed can gradually be increased.
Tires
Due to technical factors associated with their manufacture, tires do not achieve their full traction potential until after an initial breaking-in period.
Drive conservatively for the first 200 miles/300 km.
Brake system
Brakes require an initial break-in period of approx.
300 miles/500 km to achieve optimized contact and wear patterns between brake pads and discs. Drive moderately during this break-in period.
Following part replacement
The same breaking in procedures should be observed if any of the components mentioned above have to be renewed in the course of the vehicle's operating life.
See also:
Closing
Recessed grips in the interior trim of the trunk
lid make it easier to pull down the lid.
Danger of pinching
Make sure that the closing path of the
trunk lid is clear; otherwise, injuries may ...
Active seat
Active seat
The seat cushion is actively varied by alternately
raising and lowering the right and left half of the
seat cushion. This reduces muscular tension
and fatigue to help prevent lowe ...
DTMF suffix dialing
DTMF suffix dialing can be used for gaining access
to network services or for controlling devices,
e.g., to make a remote inquiry of an answering
machine. The DTMF code is needed for this
purp ...