Displays in the instrument cluster

Desired speed

green: the system is active. ▷ The marking lights up in green: the system is active.
▷ The marking lights up in orange:

the system has been interrupted.
▷ The marking does not light up: the system is switched off.

Brief status display

If --- appears briefly on the display for Check Selected desired speed.

If --- appears briefly on the display for Check Control messages, it is possible that the system requirements for operation are currently not met.

Distance to vehicle ahead of you

The selected distance to the vehicle driving ahead of you is shown.

Indicator/warning lamps

Indicator/warning lamps

The indicator and warning lamps do not Personal responsibility
The indicator and warning lamps do not relieve the driver of the responsibility to adapt his or her desired driving speed and style to the traffic conditions.◀

equipped, Depending on how the vehicle is equipped, the indicator lamp in the instrument cluster indicates whether the system is switched on.

orange: The vehicle symbol lights up in orange:

A vehicle has been detected ahead of you.

orange: The vehicle symbol flashes orange:

The conditions are not adequate for operating the system.

The system was deactivated but applies the brakes until you actively assume control by pressing on the brake pedal or accelerator.

and an The vehicle symbol flashes red and an acoustic signal sounds:

You are requested to intervene by braking or making an evasive maneuver.

    See also:

    Roller sunblinds for the rear side windows
    Pull out the roller sunblind at the loop and hook it onto the bracket. Do not open the window while the roller sunblind is raised. Do not open the window while the roller sunblind is raised ...

    System limits
    Top View cannot be used in the following situations: ▷ With a door open. ▷ With the trunk lid open. ▷ With an exterior mirror folded in. ▷ In poor light. A Check Control m ...

    Seat and mirror memory
    General information Two different driver's seat and exterior mirror positions can be stored and retrieved for each remote control. Settings for the backrest width and lumbar support are not stor ...