Engaging the transmission position

▷ Transmission position P can only be disengaged if the engine is running and the brake pedal is pressed.
▷ With the vehicle stationary, press on the brake pedal before shifting out of P or N; otherwise, the shift command will not be executed: shift lock.

To prevent the vehicle from creeping after Depress the brake until you start driving
To prevent the vehicle from creeping after you select a driving position, maintain pressure on the brake pedal until you are ready to start.◀

Engaging D, R and N

Briefly push the selector lever in the desired direction,

Briefly push the selector lever in the desired direction, beyond a resistance point if necessary.

After releasing the selector lever, it returns to its center position.

Press unlock button, in order to:

Press unlock button, in order to:

▷ Engage R.
▷ Shift out of P.

Engaging P

Press button P.

Press button P.

    See also:

    Adaptive fixing system
    The adaptive fixing system is used to divide up the cargo area. It consists of two brackets with a telescopic rail and retaining straps. These are guided into the two rails on the cargo area flo ...

    Removing: manual head restraints
    Only remove the head restraint if no one will be sitting in the seat in question. 1. Pull the head restraint upward as far as possible. 2. Press the button, arrow 1, and pull the head restrain ...

    Displays in the instrument cluster
    Selected program The selected program is displayed in the tachometer. Program selection Pressing the button displays a list of the selectable programs. Display on the Control Display Prog ...