Setting
Pull the switch.
The LED lights up.
The indicator lamp lights up in
red. The
parking brake is set.
Lower lamp: indicator lamp in
Canadian
models
Set the parking brake and further secure
the vehicle as required
Set the parking brake firmly when parking; otherwise,
the vehicle could roll. On steep upward
and downward inclines, further secure the vehicle,
for example, by turning the steering wheel in
the direction of the curb. ◀
While driving
Use while driving serves as an emergency braking function:
Pull the switch and hold it. The vehicle brakes hard while the button is being pulled.
The indicator lamp lights up in
red, a signal
sounds and the brake lamps light up.
Lower lamp: indicator lamp in
Canadian
models
If the vehicle is braked to a speed of approx.
2 mph/3 km/h, the parking brake remains set.
See also:
Display
Display
Information stage
The dimmed lamp in the mirror housing indicates
when there are vehicles in the blind spot
or approaching from behind.
Warning
If the turn signal is set while a ve ...
Daytime running lights
The daytime running lights light up in position
0, and
. After the ignition is
switched off, the parking lamps light up in position
Activating/deactivating
1. "Settings"
2. " ...
Driving tips
This chapter provides you with information useful
in dealing with specific driving and operating
modes. ...
