Check oil level
The concept
The oil level is monitored electronically during driving and shown on the Control Display.
If the oil level reaches the minimum level, a check control message is displayed.
Displaying the oil level
1. "Vehicle Info".
2. "Vehicle status".
3.
"Engine oil level"
Possible messages
▷ "Engine oil level OK".
▷ "Engine oil at minimum. Add 1 quart of engine oil!".
Within the next 125 miles/200 km, a maximum of 1 US quart/liter oil.
▷ "Engine oil level below minimum. Add 1 quart!".
Immediately add 1 US quart/liter of oil.
Detailed measurement
Requirements:
▷ Vehicle is on a level road and the engine is running at operating temperature.
▷ Manual transmission: Shift lever in neutral position clutch and gas pedal not depressed.
▷ Automatic transmission: Selector lever in transmission position N or P and gas pedal not depressed.
In order to perform a detailed measurement of the engine oil level:
1. "Vehicle Info".
2. "Vehicle status".
3.
"Measure engine oil level".
4. "Start measurement"
The oil level is checked and displayed via a scale.
During the detailed measurement, the idle speed is increased somewhat.
Duration: approx. 1 minute.
See also:
USB audio interface/mobile phoneaudio interface
At a glance
It is possible to connect external audio devices.
Operation can be performed via iDrive. The
sound is output on the vehicle loudspeakers.
Connectors for external devices
► Con ...
Messages after trip completion
Special messages that are displayed during
driving are displayed again after the ignition is
switched off. ...
Compatibility
If this symbol is printed on
the packaging
or in the instructions of the hand-held
transmitter, the remote-controlled device
is generally compatible with the universal
remote control.
If y ...
