Switching spoken instructions on/off
The setting is stored for the remote control currently in use.
1. "Navigation"
2. "Map"
3. 
"Voice
instructions"
See also:
Storing
1. Switch on the ignition.
2. Set the desired position.
3. Press the button. The LED in
the
button lights up.
4. Press the desired button 1 or
2. The LED
goes out.
If the M button is pre ...
Malfunction
The yellow warning lamp flashes and
then lights up continuously. A Check
Control message is displayed. No flat
tire can be detected.
Display in the following situations:
A wheel without T ...
Initialization
The initialization process adopts the set inflation
tire pressures as reference values for the detection
of a flat tire. Initialization is started by confirming
the inflation pressures.
Do not ...