Instrument lighting
Adjusting
The parking lamps or low beams must be switched on to adjust the brightness.
Adjust the brightness using the thumbwheel.
See also:
Display on the Control Display
Switching on the backup camera via the
iDrive
With PDC activated:
"Rear view camera"
The backup camera image is displayed. The setting
is stored for the remote control currently in ...
Activating HDC
Activating HDC
Press the button; the LED above the button
lights up.
The LED flashes when the brakes are applied
automatically. ...
Preparation
1. Check whether the battery of the other vehicle
has a voltage of 12 volts and approximately
the same capacitance in Ah. This information
can be found on the battery.
2. Switch off the engine ...