Increasing desired speed
Repeatedly press the lever to the resistance point or beyond, arrow 1, until the desired speed is reached.
▷ Each time the lever is pressed to the point of
resistance, the desired speed increases by
approx. 1 mph/1 km/h.
▷ Each time the lever is pressed beyond the
resistance point, the desired speed is increased
by up to 5 mph/10 km/h.
The system stores and maintains the speed
Accelerating using the lever
Accelerating slightly:
Press the lever to the resistance point, arrow 1, until the desired speed is reached.
Accelerating significantly:
Press the lever beyond the resistance point, arrow 1, until the desired speed is reached.
The vehicle accelerates without pressure on the accelerator pedal. The system stores and maintains the speed.
See also:
Initialization after a power failure
After a power failure, it is only possible to raise
the roof, if necessary.
Have the system initialized by your service center. ...
Display
Display
▷ Lines, arrow 1: the system is activated.
▷ Arrows, arrow 2: at least one lane marking
was detected and warnings can be issued. ...
Remove attached parts following use
Remove unneeded auxiliary mirrors, roof or rear
luggage racks after use.
Attached parts on the vehicle impair the aerodynamics
and increase the fuel consumption. ...
