Deactivating/activating DTC Dynamic Traction Control
Activating the Dynamic Traction Control DTC provides maximum traction on loose ground.
Driving stability is limited during acceleration and when driving in bends.
Activating DTC
Press the button.
TRACTION is displayed in the instrument cluster and the indicator lamp for DSC OFF lights up.
Deactivating DTC
Press the button again.
TRACTION and the DSC OFF indicator lamp go out.
See also:
Programming
LED, arrow 1.
Memory buttons, arrow 2.
Fixed-code hand-held transmitters
1. Switch on the ignition.
2. Initial setup:
Press both outer buttons 1 and 3 for approx.
20 seconds until the L ...
Precision chassis engineering sets new standards: sporty handling, high
agility and increased comfort
In the sixth model generation, too, dynamism and performance are among the
stand-out features of the BMW sports sedan. These qualities are underpinned by a
precision-engineered chassis that perfec ...
Automatic mode
The automatic engine start/stop function is operational
after each engine start.
The function is activated above a certain speed.
▷ Manual transmission: above 3 mph, approx.
5 km/h.
▷ ...