Destination guidance through voice instructions
See also:
Maintaining/storing the speed
Press the button*.
When the system is switched on, the current
speed is maintained and stored as the desired
speed.
It is displayed in the speedometer and briefly
displayed in the instrument ...
Low tire pressure message
The yellow warning lamp lights up. A
Check Control message is displayed.
There is a flat tire or a major loss in
tire inflation pressure.
The system was not reset after a wheel
change ...
Storing
1. Switch on the ignition.
2. Set the desired position.
3. Press the button. The LED in
the
button lights up.
4. Press the desired button 1 or 2. The LED
goes out.
If the M button is presse ...
