BMW X5: luggage compartment roller cover
BMW X5: luggage compartment roller
cover
Pull out the luggage compartment roller cover and hook it into the brackets.
Do not deposit heavy objects
Do not deposit heavy or hard objects on
the luggage compartment roller cover. Otherwise,
they may present a danger to occupants,
for instance during braking and evasive maneuvers.◀
Do not let the luggage area retractable
cover snap back
Do not let the luggage compartment retractable
cover snap back as this could damage the
cover.◀
Removing
1. Unlock the case with the button, arrow 1
Unlock the case with the button
2. Swing the case somewhat to the left, arrow 2, and remove it.
Installing
When installing, proceed in the opposite order of removal.
When installing, proceed in the opposite order
of removal
1. Lay the case on the left-hand side and push it forward, arrow 1.
2. Swing the case toward the inside, see arrow 2.
3. Push the case forward at the ends until it engages in the two side brackets.
4. Check whether the case is properly locked in place by pulling it with a sudden movement.
See also:
Fuses
Never attempt to repair a blown fuse and do
not replace a defective fuse with a substitute of another color or amperage rating;
otherwise, this could lead to a circuit overload, ultimately result ...
Front
Seat heating
The temperature setting progresses one step
through its control sequence each time you
press the button. The maximum temperature is
reached when three LEDs are lit.
To switch of ...
Image on the Control Display
Switching on the rear view camera
using iDrive
With PDC activated:
"Rear view camera"
The image of the rear view camera is displayed.
The setting is stored for the remote control cur ...