Cooling function
The passenger compartment can only be cooled with the engine running.
Press the button.
The air is cooled and dehumidified and – depending on the temperature setting – warmed again.
The cooling function helps to prevent condensation on the windows or to remove it quickly.
Depending on the weather, the windshield may fog up briefly when the engine is started.
The cooling function is switched on automatically with the AUTO program.
When using the automatic climate control, condensation water, develops that exits underneath the vehicle.
See also:
Increasing or decreasing vehicle speed
Specify desired speed in the range from approx.
4 mph/6 km/h to approx. 15 mph/25 km/h using
the rocker switch of the cruise control on the
steering wheel. Vehicle speed can be changed
by lightl ...
The concept
Pressing the Start/Stop button
switches the ignition on or off and
starts the engine.
Automatic transmission: the engine
starts if the brake is depressed
when the Start/Stop button is pre ...
Automatic deactivation of the front passenger airbags
The occupation of the seat is detected by evaluating
the impression on the occupied seat surface
of the front passenger seat.
The front and side airbags on the front passenger
side are activate ...