Self-leveling suspension
The concept
The self-leveling suspension on the rear axle assures a continuous ground clearance.
To do so, the height of the vehicle is measured by sensors at both rear wheels.
If the actual height deviates from the defined height, such as due to cargo in the vehicle, this difference is compensated very quickly. In addition, spring motions resulting from cornering or irregularities in the road surface are reduced to a minimum.
The system works automatically.
Malfunctions
Malfunctions are displayed via Check Control
See also:
Functional requirements
The system must have been reset when the inflation
pressure was correct; otherwise, reliable
signaling of a flat tire is not ensured. Always use
wheels with TPM electronics to ensure that the
...
Deleting all stored programs
Press both outer memory buttons 1 for approx.
20 seconds until the LED flashes rapidly.
All stored programs are deleted.
The programs cannot be deleted individually. ...
Connecting electrical devices
Sockets
The lighter socket can be used as a socket for
electrical equipment while the engine is running
or when the ignition is switched on. The total load of all sockets must not
exceed 140 Wa ...